 PC104pPWR28Company Description:Energize all of the Rails in your Design with a Single 28V Power SupplyEnergize all of the rails in your design with a single power supply. The PC104pPWR28 power supply provides for the +5, +3.3, +12, minus 12 and minus 5 from a 28V supply, battery etc. Each rail is fuse protected. The supply uses switching technology to provide high efficiency coupled with low pass filtering to provide low noise and fast response to transient loads. Aircraft and other systems use 28V power to operate equipment. The PC104pPWR28 has a wide input range to operate with 14 - 34 V power. It is possible to operate at voltages between 12 and 14, however in this range the PC104pPWR12 <http://www.dyneng.com/pc104p_pwr12.html>; is recommended. The reference power is converted to 12VDC. The 12VDC is fuse protected and tied to the PC104 stack connection. The pre fuse 12V power is also connected to the 5V, 3.3V, -5V and -12V power supplies. All rails are transorb and fuse protected on the output side of the supply. Worldwide Headquarters:
|