The embedded systems' products, services & research guide.

Sub-Categories:

Items in this category:

NPMC-STM4: - by N.A.T. GmbH

The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3. ...

NPMC-8E1/T1/J1: - by N.A.T. GmbH

The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module ...

NPMC-DSP: - by N.A.T. GmbH

The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is target ...

CCII 8-Channel E1/T1 Telecomms PMC: - by CCII Systems (Pty) Ltd

Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications ...

CCII Universal Telecomms PMC: - by CCII Systems (Pty) Ltd

Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations ...

PMC Spacewire: - by Dynamic Engineering

Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical p ...

NVTP1001: - by N.A.T. GmbH

The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as wel ...

NPMC-860-I/O: - by N.A.T. GmbH

The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel conne ...

NPMC-860-SIO: - by N.A.T. GmbH

The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SR ...

NPMC-EXT64: - by N.A.T. GmbH

The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/ ...

NPMC-860-CPU: - by N.A.T. GmbH

The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides f ...

NPMC-860-4S0: - by N.A.T. GmbH

The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate inte ...

NPMC-860-2E1: - by N.A.T. GmbH

The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an e ...

NPMC-860-2T1: - by N.A.T. GmbH

The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an e ...

NPMC-8280-4E1/T1/J1: - by N.A.T. GmbH

The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 “PowerQuicc II” processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using s ...

NPMC-8266-OC3: - by N.A.T. GmbH

N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the ne ...

NPMC-4T1: - by N.A.T. GmbH

The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controlle ...

NPMC-8260-4E1/T1: - by N.A.T. GmbH

The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet por ...

NPMC-4E1: - by N.A.T. GmbH

The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controll ...

TPMC402-11: - by TEWS TECHNOLGIES GmbH

Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0°C to +70 ...

TPMC402-31: - by TEWS TECHNOLGIES GmbH

Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0°C to +70° ...

NPMC-STM1: - by N.A.T. GmbH

The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachi ...

wanPMC-2SSI Dual Port Synchronous Serial: - by SBE, Inc.

High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for ...

PMC-8260: - by SBS Technologies

Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for ...

PMC-4U: - by Dynamic Engineering

The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and S ...

PMC4U-synchronous & asynchronous protocals, SCC: - by Dynamic Engineering

The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and ...

ADM-XP: - by Alpha Data

Based on the largest Virtex-II Pro Platform FPGAs from Xilinx, the ADM-XP provides a powerful and simple solution for prototyping and embedding. Features include 2VP100, PCI66/64/PCI-X, 128M ...

ADM-XRC: - by Alpha Data

High performance FPGA based PMC featuring the largest Xilinx Virtex devices. Leverages rapid hardware development or integration of a wide range of telecoms IP Cores including encryption and ...

ADM-XRC-II: - by Alpha Data

High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MB ...

ADM-XPL: - by Alpha Data

Based on the Virtex-II Pro Platform FPGA from Xilinx, the XPL provides a powerful and simple solution for prototyping and embedding. Features include PCI66/64, DDR SDRAM, ZBT, high desity ad ...

PMC668: - by GE Fanuc

ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical ...

wanPMC-1T3: - by SBE, Inc.

SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Ope ...

wanPMC-1SSI: - by SBE, Inc.

SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled w ...

wanPMC-C4T1E1: - by SBE, Inc.

SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDL ...

wanPMC-1HSSI: - by SBE, Inc.

* Full T3 to support DS3 Network Service Unit<BR> * Full E3 for speeds of up to 32Mbps<BR> * Fractional T3 and E3 bandwidth<BR> * Inverse T1 and E1 multiplexors < ...

MPMC860: - by Motorola Inc., Embedded Communications Computing

MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 i ...

MPMC8260: - by Motorola Inc., Embedded Communications Computing

MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) complia ...

DE520 PMC: - by Force Computers

Fast EtherWORKS/PMC Adapter ...

PMC/Fast Ethernet/21143: - by Force Computers

PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor ...

PMC-8260 StackWare(TM) LAPD: - by Force Computers

FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or<BR>PMC/860 on CD-ROM, incl. control, configuration and test functions, serial<BR>port and PCI ...

PMC-8260 StackWare(TM) Frame Relay: - by Force Computers

FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1<BR>or PMC/860 on CD-ROM, incl. control, configuration and test functions,<BR>serial port a ...

PMC-8260 StackWare(TM) MTP-2: - by Force Computers

FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or<BR>PMC/860 on CD-ROM, incl. control, configuration and test functions, serial<BR>port and PCI ...

PMC-8260/DS1-H110-R: - by Force Computers

PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1<BR>i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User <BR>Flash,<BR>up t ...

PMC-8260/DS1-N-F/200-32-1: - by Force Computers

PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1<BR>i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64<BR>MTP-1 or 256 HDLC ch ...

PMC-8260/DS1-H110-F: - by Force Computers

PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1<BR>i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User<BR>Flash, up to 64 MTP-1 ...

PMC-8260/DS1-SC-F: - by Force Computers

PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1<BR>i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash,<BR>up to 64 MTP-1 or ...

PMC/860-SIO/66-4: - by Force Computers

PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set<BR>each) on 68 pin front panel connector (configurable via cable adopters), 16<BR>MB DRAM, 128kB SRA ...

PMC/860-SIO/66-2: - by Force Computers

PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set<BR>each) on 68 pin front panel connector (configurable via cable adopters), 16<BR>MB DRAM, 128kB SRA ...

PMC/860 StackWare(TM) LAPD: - by Force Computers

FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM,<BR>incl. control, configuration and test functions, serial port and PCI i/f<BR>support for ...

PMC/860 StackWare(TM) Frame Relay: - by Force Computers

FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on<BR>CD-ROM, incl. control, configuration and test functions, serial port and <BR>PCI<BR&# ...

PMC/860 StackWare(TM) MTP-2: - by Force Computers

FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM,<BR>incl. control, configuration and test functions, serial port and PCI i/f<BR>support for ...

PMC860-E1/T1: - by Force Computers

PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack avail ...