Dedicated Systems e-Spotlight: Vol 9, Issue 22s published on June 5, 2008
Welcome to this weekly issue of Dedicated Systems e-Spotlights.
Each issue is compiled from the up-to-the-minute on-line resources of
Dedicated Systems Magazine and promises to provide the latest news,
editorial and new products in dedicated systems. We hope you enjoy!
More complete information can be found by simply clicking on the "Full version" URL.
Don't hesitate to forward this e-letter to interested colleagues.
Free subscriptions are accepted at http://el.dedicated-systems.com
The chief editor accepted these announcements, which have been put in our on-line system by a series of vendors. Vendors who are not yet taking advantage of this free on-line service should contact the chief editor.
Please note:
If you decide at any time that the information you are receiving is no longer
pertinent, you may
remove yourself from the mailing list
or adapt your information in
our database.
If you want to change your email address, you should first remove the old-one as described above and then re-subscribe.
Our Sponsors
Sponsorship Opportunities:
This e-letter goes to almost 25.000 readers and is sponsored by the
companies you discover on the left. We invite our readers to visit these
sponsor companies and discover their products and services.
Previous e-Gazette View Winner
TEWS TECHNOLOGIES GmbH
TEWS TECHNOLOGIES Introduces Conduction Cooled PMC with Dual Isolated CAN Bus Interfaces
TEWS TECHNOLOGIES today announced the TPMC310, a conduction cooled PMC (PCI Mezzanine Card) CAN solution that provides two complete CAN bus interfaces using Philips SJA100 CAN controllers. The TPMC310 is ruggedized for h...
TEWS TECHNOLOGIES today announced the TPMC310, a conduction cooled PMC (PCI Mezzanine Card) CAN solution that provides two complete CAN bus interfaces using Philips SJA100 CAN controllers. The TPMC310 is ruggedized for harsh environmental conditions including COTS (commercial-off-the-shelf), industrial, and transportation applications.
The CAN bus I/O interface provides two independent channels, isolated from system logic and from each other. Each channel supports CAN specification 2.0B, and has the capability to transmit, receive and perform message filtering on extended and standard messages.
CAN High Speed transceivers are used for the CAN bus I/O interface. The I/O line configuration is configured by on-board solder pads for maximum reliability in a high-vibration en...
Date : May 26, 2008
SPOTLIGHT SELECTION
This is the spotlight edition of our e-gazette. You can still find all submitted announcements on our website.
Boards
Dynamic Engineering
IndustryPack 1553 Single & Dual Redundant BC, RT & Monitor capabilities by Dynamic Engineering
Connect your hardware to your favorite Avionics with IP-1553 and Dynamic Engineering carriers. Carriers available for many platforms including cPCI PC104 PCI, supporting multiple platforms.
MIL-STD-1553 is a versatile standardized bus interface. MIL-STD-1553 is robust featuring Manchester encoding and enough voltage swing to provide excellent noise immunity and reasonable throughput rates. MIL-STD-1553 is the interface of choice for critical applications; for example aircraft instrumentation and control. There are many devices supporting the 1553 bus - navigation devices, instrumentation, sensors and more. IP-1553 makes it easy to gain access to the MIL-STD-1553 bus. Just connect; program a few registers and then use like an IO device. IP-1553 is currently supported with the Dynamic Engineering Carrier software drivers.
http://www.dyneng.com/ip_1553.html
Connect your hardware to your favorite Avionics with IP-...
Date: Jun 05, 2008
Pentek Inc.
Pentek´s RTS 2721 Portable Signal Recording and Playback Instrument Streams Data at 500 MB/Sec
Pentek´s RTS 2721 is a highly portable instrument for recording or reproducing wideband analog signals....
* Digitizes, records and reproduces two signals up to 60 MHz bandwidth
* Portable, lightweight instrument for field use - only 23 pounds
* Provides up to 2.4 Terabytes of disk storage
* Eliminates lengthy file conversions via a direct NTFS recording format
* Fulfills need for a separate oscilloscope or spectrum analyzer
* Provides an optimized environment for communications, radar,
wireless, SIGINT and SATCOM
UPPER SADDLE RIVER, NJ-June 3, 2008-Pentek, Inc., today announced its Model RTS 2721 Portable Signal Recording and Playback Instrument, delivering truly remarkable performance while weighing only 23 pounds and measuring just 16.8 inches wide, 5.7 inches deep and 11.5 inches high. With recording and playback rates up to 500 MB/sec, the unit is well s...
Date: Jun 03, 2008
Industry News (Market)
HCC Embedded
HCC-Embedded Releases Audio Support for USB Host Stack
USB Speaker and Microphone Systems for Embedded Applications
HCC-Embedded, a leading provider of software for embedded applications, today announced the release of USBH-Audio, a class driver for use with HCCs US...
USBH-Audio supports a full spectrum of audio features for embedded applications. Included are
- FORMAT TYPE I (PCM/PCM8) streams
- FORMAT TYPE II (MPEG) streams
- Sampling rate adjustment to rate supported by the audio device
- Streaming type input terminal (playback)
- Streaming type output terminal (e.g., record from a microphone)
- AF Version 1.0 (full speed)
- Feature unit: volume/mute control, tone control, graphic equalizer, bass boost, loudness, etc.
- Processing unit: up/down mix, Dolby prologic, 3D stereo extender, reverberation, chorus, dynamic range compression, extension
- Selector unit support (switch between line in/microphone)
- Mixer unit
USBH-Audio can be used with any HCC USB host controller firmware. EHCI, OHCI and non...
Date: Jun 03, 2008
Contact:
Chief Editor: Martin Timmerman
Dedicated Systems e-Gazette and Dedicated Systems Magazine
are compiled by:
Dedicated Systems Experts sa
Engineering Audit & Expert Services
Bergensesteenweg 421, bus 12
B-1600 St-Pieters-Leeuw, Belgium
http://www.dedicated-systems.com